Door/Window Sensor (MCT-340 E)


The MCT-340 is a fully supervised, wireless magnetic Door/Window sensor, for use with ZigBee enabled home security panels. The sensor includes a built-in reed switch (that opens upon removal of a magnet placed near it). The MCT-340 tamper switch is activated when the cover is removed. A periodic supervision message is transmitted automatically. The target receiver is thus informed, at regular intervals, of the unit's active participation in the system. Operating power is obtained from an on-board 3 V Lithium battery. When the battery voltage is low, a "low battery" message will be sent to the receiver 30 days before expiration of battery life

Supported Network: ZigBee Home Automation 1.2
Frequency: 2.4 GHz as per IEEE 802.15.4
Tamper Alert: Reported when a tamper event occurs and in any subsequent message, until the tamper switch is restored.
ELECTRICAL Internal Battery: 3V Lithium battery, type CR2032. Use Varta only.
Nominal Battery Capacity: 230mAh
Battery Life Expectancy: 3 years (for typical use).


SKU 0-103376
Firmware Version V1.0.3
Hardware Version 1
Certificate ID ZIG15034ZHA25702-24
Certified Date 08/04/2015
Compliance Document Download Compliance Document
Product has successfully completed TIS/TRP testing No

Develop your product with the Zigbee Alliance